In situ magnesiothermic reduction synthesis of a Ge@C composite for high-performance lithium-ion batterie anodes

• Ha Tran Huu,
• Ngoc Phi Nguyen,
• Vuong Hoang Ngo,
• Huy Hoang Luc,
• Minh Kha Le,
• Minh Thu Nguyen,
• My Loan Phung Le,
• Hye Rim Kim,
• In Young Kim,
• Sung Jin Kim,
• Van Man Tran and
• Vien Vo

Beilstein J. Nanotechnol. 2023, 14, 751–761, doi:10.3762/bjnano.14.62

• microscopy (HR-TEM, JEOL JEM-2100F) were conducted for morphology and particle size investigation. A well-blended mixture of active material, conductive carbon C65, and polyvinylidene fluoride (PVDF) binder with a mass ratio of 75:15:10 in N-methyl-2-pyrrolidone solvent was used for fabricating the working

Near-infrared photoactive Ag-Zn-Ga-S-Se quantum dots for high-performance quantum dot-sensitized solar cells

• Roopakala Kottayi,
• Ilangovan Veerappan and
• Ramadasse Sittaramane

Beilstein J. Nanotechnol. 2022, 13, 1337–1344, doi:10.3762/bjnano.13.110

• (GaCl3), sulfur powder (S), 1-dodecanethiol (DDTh), ʟ-cysteine, copper(II) chloride, polyvinylidene fluoride (PVDF), titanium isisopropoxide (TIP), glycerol, oleylamine (OAM), titanium tetrachloride (TiCl4), N-methyl-2-pyrrolidine (NMP), chloroform, acetonitrile, ethanol, and methanol were purchased from

Piezoelectric nanogenerator for bio-mechanical strain measurement

• Zafar Javed,
• Lybah Rafiq,
• Muhammad Anwaar Nazeer,
• Saqib Siddiqui,
• Muhammad Babar Ramzan,
• Muhammad Qamar Khan and
• Muhammad Salman Naeem

Beilstein J. Nanotechnol. 2022, 13, 192–200, doi:10.3762/bjnano.13.14

• ]. Polyvinylidene fluoride (PVDF), having a semi-crystalline structure, is generally synthesized through polymerization of vinylidene difluoride [20]. It generally has four crystalline phases, namely α, β, ε, and γ. Among them, the beta phase possesses the highest dipole movements, while the other phases are

• compared with the current state of the art. To the best of our knowledge, the PVDF-based nanofibrous device developed in this study is superior to previously reported ones. Experimental Materials Polyvinylidene fluoride (PVDF) obtained from Alfa Aesar was used as a piezoelectric material. Dimethylformamide

• fluoride (PVDF) and other piezoelectric polymers are used in the form of fibers, filaments, and composites. In this research, PVDF nanofibers were developed and integrated onto a knitted fabric to fabricate a piezoelectric device for human body angle monitoring. Scanning electron microscopy and X-ray

Piezoelectric sensor based on graphene-doped PVDF nanofibers for sign language translation

• Shuai Yang,
• Xiaojing Cui,
• Rui Guo,
• Zhiyi Zhang,
• Shengbo Sang and
• Hulin Zhang

Beilstein J. Nanotechnol. 2020, 11, 1655–1662, doi:10.3762/bjnano.11.148

• /bjnano.11.148 Abstract The tracking of body motion, such as bending or twisting, plays an important role in modern sign language translation. Here, a subtle flexible self-powered piezoelectric sensor (PES) made of graphene (GR)-doped polyvinylidene fluoride (PVDF) nanofibers is reported. The PES exhibits

• effectively used, especially in human–computer interaction, such as gesture control, rehabilitation training, and auxiliary communication. Keywords: motion sensor; piezoelectric; polyvinylidene fluoride (PVDF); self-powered; sign language translation; Introduction Sign language, as a communication method

High permittivity, breakdown strength, and energy storage density of polythiophene-encapsulated BaTiO₃ nanoparticles

• Adnanullah Khan,
• Amir Habib and
• Adeel Afzal

Beilstein J. Nanotechnol. 2020, 11, 1190–1197, doi:10.3762/bjnano.11.103

• BTO nanoparticles. For instance, Dang et al. [9] achieved a permittivity value of ca. 40 at 10 kHz with 50 vol % loading of BTO in polyvinylidene fluoride (PVDF). However, such a high content of BTO nanoparticles has severe effects on the overall performance of the composite dielectric materials [9

Preparation, characterization and photocatalytic performance of heterostructured CuO–ZnO-loaded composite nanofiber membranes

• Wei Fang,
• Liang Yu and
• Lan Xu

Beilstein J. Nanotechnol. 2020, 11, 631–650, doi:10.3762/bjnano.11.50

• widely used to fabricate nanofiber membranes because of its good spinnability, electrical conductivity, and heat resistance. However, carbonized PAN nanofiber membranes usually have poor mechanical properties. Polyvinylidene fluoride (PVDF) has better mechanical properties but a lower melting point

• = 150,000 g/mol) powders were purchased from Beijing Lark Branch Co., Ltd. (Beijing, China). Polyvinylidene fluoride (PVDF, Mw = 400,000 g/mol) and N,N-dimethylformamide (DMF) were provided from Shanghai Chemical Reagent Co., Ltd. (Shanghai, China). Anhydrous copper sulfate (CuSO4, Mw = 159.60 g/mol), zinc

Preparation and in vivo evaluation of glyco-gold nanoparticles carrying synthetic mycobacterial hexaarabinofuranoside

• Gennady L. Burygin,
• Polina I. Abronina,
• Nikita M. Podvalnyy,
• Sergey A. Staroverov,
• Leonid O. Kononov and
• Lev A. Dykman

Beilstein J. Nanotechnol. 2020, 11, 480–493, doi:10.3762/bjnano.11.39

• polyvinylidene fluoride (PVDF) membrane (Figure 5). Ara6 glycoside 1 (with a short spacer aglycon) was detected by antisera against both Ara6C2NH2-GNPs 3 and Ara6C2EG7NH2-GNPs 4. This means that there was a serological cross-reaction for the obtained antisera against Ara6-GNPs 3 and 4. Remarkably, both antisera

• immunoassay (titrated twice in the microtiter plate) as follows. An aliquot (1 μL) of solution of each antigen (1 or 2) in the double dilutions (initial concentration, 1 mg·mL−1) was spotted onto a Westran S polyvinylidene fluoride (PVDF) membrane (Whatman), and the membrane was incubated in a dry-air

Ultrathin Ni_1−xCo_xS₂ nanoflakes as high energy density electrode materials for asymmetric supercapacitors

• Xiaoxiang Wang,
• Teng Wang,
• Rusen Zhou,
• Lijuan Fan,
• Shengli Zhang,
• Feng Yu,
• Tuquabo Tesfamichael,
• Liwei Su and
• Hongxia Wang

Beilstein J. Nanotechnol. 2019, 10, 2207–2216, doi:10.3762/bjnano.10.213

• furnace cooled down to room temperature. For the electrode fabrication, the resultant Ni1−xCoxS2 powder was mixed uniformly with acetylene black and polyvinylidene fluoride (PVDF) with a mass ratio of 8:1:1. The powder mixture was then dispersed in N-methyl-2-pyrrolidinone (NMP) and mixed well before

Warped graphitic layers generated by oxidation of fullerene extraction residue and its oxygen reduction catalytic activity

• Machiko Takigami,
• Rieko Kobayashi,
• Takafumi Ishii,
• Yasuo Imashiro and
• Jun-ichi Ozaki

Beilstein J. Nanotechnol. 2019, 10, 1391–1400, doi:10.3762/bjnano.10.137

• /L KNO3. The carbons, bound by using a polyvinylidene fluoride (PVDF) resin solution (KF polymer L, #7305, NMP solution, Kureha Co. Ltd.) with a composition of carbon/PVDF = 1/0.5, served as a working electrode with round shape. A potentiostat system (ALS700 series, BAS Japan) was used to record the

An efficient electrode material for high performance solid-state hybrid supercapacitors based on a Cu/CuO/porous carbon nanofiber/TiO₂ hybrid composite

• Mamta Sham Lal,
• Thirugnanam Lavanya and
• Sundara Ramaprabhu

Beilstein J. Nanotechnol. 2019, 10, 781–793, doi:10.3762/bjnano.10.78

• capacitance fade and offers superior cycling stability. Our work introduces a new avenue and offers prospective electrode materials for advanced supercapacitors in the near future. Experimental Chemicals Polyacrylonitrile (PAN, Mw = 150,000 g mol−1), polyvinylidene fluoride (PVDF, Mw = 120,000 g mol−1

• material slurry was prepared using a mixture of the material, i.e., polyvinylidene fluoride (PVDF) as binder (15%), conductive carbon (10%) and active material (75%) in N-methyl-2-pyrrolidone (NMP) solvent to form a viscous slurry using a mortar and pestle. This slurry was coated on the carbon sheet with

A porous 3D-RGO@MWCNT hybrid material as Li–S battery cathode

• Yongguang Zhang,
• Jun Ren,
• Yan Zhao,
• Taizhe Tan,
• Fuxing Yin and
• Yichao Wang

Beilstein J. Nanotechnol. 2019, 10, 514–521, doi:10.3762/bjnano.10.52

• @MWCNT composite. The cathode was fabricated by coating a slurry of S-3D-RGO@MWCNT, polyvinylidene fluoride (PVDF) and carbon black (mass ratio 8:1:1) on a carbon-coated Al foil. Materials characterization X-ray diffraction (XRD) patterns of the as-prepared 3D-RGO@MWCNT composite were obtained using XRD

Nitrogen-doped carbon nanotubes coated with zinc oxide nanoparticles as sulfur encapsulator for high-performance lithium/sulfur batteries

• Yan Zhao,
• Zhengjun Liu,
• Liancheng Sun,
• Yongguang Zhang,
• Yuting Feng,
• Xin Wang,
• Indira Kurmanbayeva and
• Zhumabay Bakenov

Beilstein J. Nanotechnol. 2018, 9, 1677–1685, doi:10.3762/bjnano.9.159

• wt % polyvinylidene fluoride (PVDF) in N-methyl-2-pyrrolidone (NMP). The resulting homogeneous slurry was coated on nickel foam and subsequently dried at 75 °C overnight. Metallic lithium foil served as a counter and reference electrode, and micro-porous polypropylene film (Cellgard 2300) was used as

Engineering of oriented carbon nanotubes in composite materials

• Razieh Beigmoradi,
• Abdolreza Samimi and
• Davod Mohebbi-Kalhori

Beilstein J. Nanotechnol. 2018, 9, 415–435, doi:10.3762/bjnano.9.41

• under the elastic field from the polymer matrix [33] (Figure 3). The stretching ratio depends on the length ratio of the thin layer before/after stretching. Yao et al. prepared a MWCNT/polyvinylidene fluoride (PVDF) nanocomposite at a relatively high concentration of CNTs and aligned them inside the

Synthesis and characterization of electrospun molybdenum dioxide–carbon nanofibers as sulfur matrix additives for rechargeable lithium–sulfur battery applications

• Ruiyuan Zhuang,
• Shanshan Yao,
• Maoxiang Jing,
• Xiangqian Shen,
• Jun Xiang,
• Tianbao Li,
• Kesong Xiao and
• Shibiao Qin

Beilstein J. Nanotechnol. 2018, 9, 262–270, doi:10.3762/bjnano.9.28

• with acetylene black and polyvinylidene fluoride (PVDF) in N-methyl-2-pyrrolidone (NMP) at a weight ratio of 7:2:1. The slurry was spread onto aluminum foil (thickness: 20 μm) and dried in vacuum at 60 °C for 12 h. Electrodes were made from punching circular discs with a diameter of 12 mm and sulfur

Carbon nanotube-wrapped Fe₂O₃ anode with improved performance for lithium-ion batteries

• Guoliang Gao,
• Yan Jin,
• Qun Zeng,
• Deyu Wang and
• Cai Shen

Beilstein J. Nanotechnol. 2017, 8, 649–656, doi:10.3762/bjnano.8.69

• %), conductive carbon black (Super P, 20 wt %) and polyvinylidene fluoride (PVDF, 10 wt %) were mixed in N-methyl-2-pyrrolidone to form a uniform slurry that was and stirred for 6 h. The slurry was spread on to the surface of a copper foil using a medical blade. The casted film was heated at 110 °C for 12 h in a

From lithium to sodium: cell chemistry of room temperature sodium–air and sodium–sulfur batteries

• Philipp Adelhelm,
• Pascal Hartmann,
• Conrad L. Bender,
• Martin Busche,
• Christine Eufinger and
• Juergen Janek

Beilstein J. Nanotechnol. 2015, 6, 1016–1055, doi:10.3762/bjnano.6.105

• electrode. Black et al. exposed battery components to potassium superoxide dissolved in aprotic liquids and found that polyvinylidene fluoride (PVDF), a common binder material, decomposes while lithium fluoride (LiF) is formed [81]. They suggest that LiO2, a strong base that is formed as an intermediate in

Influence of particle size and fluorination ratio of CF_x precursor compounds on the electrochemical performance of C–FeF₂ nanocomposites for reversible lithium storage

• Ben Breitung,
• M. Anji Reddy,
• Venkata Sai Kiran Chakravadhanula,
• Michael Engel,
• Christian Kübel,
• Annie K. Powell,
• Horst Hahn and
• Maximilian Fichtner

Beilstein J. Nanotechnol. 2013, 4, 705–713, doi:10.3762/bjnano.4.80

• and polyvinylidene fluoride (PVDF) in the mass ratio 90:10. A slurry containing the above mixture was prepared by using N-methyl-2-pyrrolidinone. It was spread on a stainless steel (SS) foil (area: 1.13 cm2) and dried on hot plate at 160 °C for 12 h. Typically, each electrode contained 3–4 mg of

Electrochemical and electron microscopic characterization of Super-P based cathodes for Li–O₂ batteries

• Mario Marinaro,
• Santhana K. Eswara Moorthy,
• Jörg Bernhard,
• Ludwig Jörissen,
• Margret Wohlfahrt-Mehrens and
• Ute Kaiser

Beilstein J. Nanotechnol. 2013, 4, 665–670, doi:10.3762/bjnano.4.74

• cells were prepared by airbrushing a suspension of Super-P (Timcal) and polyvinylidene fluoride (PvdF) in N-methyl-2-pyrrolidone (mass ratio Super-P/PvdF 8:2) on a gas diffusion layer (Toray paper). The obtained electrodes of 12 mm in diameter were first dried at 100 °C in order to allow the evaporation

AFM as an analysis tool for high-capacity sulfur cathodes for Li–S batteries

• Renate Hiesgen,
• Seniz Sörgel,
• Rémi Costa,
• Linus Carlé,
• Ines Galm,
• Natalia Cañas,
• Brigitta Pascucci and
• K. Andreas Friedrich

Beilstein J. Nanotechnol. 2013, 4, 611–624, doi:10.3762/bjnano.4.68

• samples prepared by either suspension-spraying or doctor-blade coating with different binders. Morphological studies of the cathodes before and after the electrochemical tests were performed by using AFM and scanning electron microscopy (SEM). The cathodes that contained polyvinylidene fluoride (PVDF) and

• ]. Polyvinylidene fluoride (PVDF) and carboxymethyl cellulose (CMC) binders were used to test the influence of the binders on the battery performance. The suspension-spraying technique is advantageous because it can be used in mass production processes. In a first step the focus was on the preparation of a porous

• nature are useful to optimize battery materials. Experimental Cathode preparation Suspensions were prepared by mixing sulfur (100 mesh, 99.5%, Alfa Aesar), carbon black Super P conductive (99%, Alfa Aesar), polyvinylidene fluoride (PVDF) binder (Aldrich) with dimethyl sulfoxide (DMSO) (≥99.9%, Aldrich